天貓魔盒1代E版TTL啟動無法打斷

helloween · 發表于 2015-8-31 11:46

刷了YYF的固件，一直當nas用，遠程迅雷用的很爽。某日突然死機，重啟之后卡第二屏。進rec雙清死機，刷機死機。昨天買了ttl線，按照論壇的方法進行連接，但是無論如何也無法啟動到命令行方式，按網上說的按回車也無法打斷啟動過程。用短接方式從TF卡啟動也是無法打斷。。。

附上TTL啟動信息如下：

EEEE I3000000032940xf300110003877520EEEE I400000004294_M6_BL1_3431>2534313
device is 16bit ddr
wait pll-0x03 target is 0204 now it is 0x00000203
DDR clock is 516MHz with 1T mode
516M clk
DX0DLLCR:40000000
DX0DQTR:ffffffff
DX0DQSTR:3db05001
DX1DLLCR:40000000
DX1DQTR:ffffffff
DX1DQSTR:3db05001
DX2DLLCR:40000000
DX2DQTR:ffffffff
DX2DQSTR:3db05001
DX3DLLCR:40000000
DX3DQTR:ffffffff
DX3DQSTR:3db05001
Stage 00 Result 00000000
Stage 01 Result 00000000
Stage 02 Result 00000000
Stage 03 Result 00000000
HHH
Boot From SPI0x12345678
Boot from internal device 1st SPI RESERVED
System Started
nv_init env_init 40

U-boot-00000-g3e9c579(m6_mbx_g32@jb42-0630) (Apr 08 2014 - 12:22:39)
aml_rtc_init
aml rtc init first time!
Clear HDMI KSV RAM
DRAM:  1 GiB
relocation Offset is: 105e8000
NAND:  Amlogic nand flash uboot driver, Version U1.06.017 (c) 2010 Amlogic Inc.
SPI BOOT : continue i 0
No NAND device found!!!
NAND device id: 2c 68 4 4a a9 0
NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron C revision NAND 4GiB MT29F32G-C)
1 NAND chips detected
#####aml_nand_init, with RB pins and chip->chip_delay:20
bus_cycle=5, bus_timing=6, start_cycle=6, end_cycle=7,system=5.0ns
oob size is not enough for selected bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_BCH30_1K_MODE
aml_chip->oob_fill_cnt =0,aml_chip->oob_size =224,bch_bytes =54
aml_nand_init:oobmul =2,chip->ecc.layout->oobfree[0].length=16,aml_chip->oob_size=224
aml nand env valid addr: 10000 ,status =0
key start_blk=2040,end_blk=2047,aml_nand_key_init:684
aml nand key valid addr: ff010000
aml nand key valid addr: ff210000
aml nand key valid addr: ff410000
aml nand key valid addr: ff610000
CONFIG_KEYSIZE=0x10000; KEYSIZE=0xfffc; bbt=0x1330; default_keyironment_size=0xeccc
i=0,register --- nand_key
NAND bbt detect factory Bad block at 5a00000
Creating 8 MTD partitions on "nandnormal":
0x000000800000-0x000001000000 : "logo"
0x000001000000-0x000001800000 : "aml_logo"
0x000001800000-0x000002000000 : "recovery"
0x000002000000-0x000002800000 : "boot"
0x000002800000-0x000042a00000 : "system"
NAND bbt detect factory Bad block at 5a00000
0x000042a00000-0x000062a00000 : "cache"
0x000062a00000-0x000072a00000 : "backup"
0x000072a00000-0x0000ff000000 : "data"
nandnormal initialized ok
detect mx chiprevD :1 and nand_type: 0
nand_curr_device =1
MMC: SDIO Port B: 0, SDIO Port C: 1
SPI BOOT,spi_env_relocate_spec : env_relocate_spec 53
do not to enable write protect for S25FL032A!!!
In: serial
Out: serial
Err: serial
register usb cfg[0] = 9fe82948
Net: current factory:3
default eth phy
Meson_Ethernet
init suspend firmware done. (ret:0)
detect_storage
nand exist return 0
setenv storage nand
reboot_mode=charging
ir init
switch_boot_mode
suspend_status_current2=0
need set factory reset false
Saving Environment to SPI Flash...
SPI BOOT,spi_saveenv : saveenv 93
Erasing SPI flash...Writing to SPI flash...done
current factory:3
Hit Enter key to stop autoboot:  0
compatible nand
Booting from nand ...
NAND read: logo whole chip
8388608 bytes read: OK
NAND read: boot offset 0x0, size 0x600000
6291456 bytes read: OK
pre-clear hdmi ram
hdcp get form storage medium: nand
name=nand_key nand_key
read:addr:0xff010000,phy_blk_addr:2040,phy_page_addr:8,aml_nand_get_key:125
device:nand, init key ok!!
don't found keyname,uboot_key_read:1502
prefetch hdcp keys from nand failed
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-3.0.50-ge336c4d
Image Type: ARM Linux Kernel Image (lzma compressed)
Data Size: 3406750 Bytes = 3.2 MiB
Load Address: 80008000
Entry Point:  80008000
Verifying Checksum ... OK
      Ramdisk start addr = 0x82340800, len = 0x1034a3
Uncompressing Kernel Image ... OK
machid from environment: 0x4e27
EFUSE machid is not set.
Using machid 0x4e27 from environment
Starting kernel ...
[ 4.536462@0] kobject (df030a10): tried to init an initialized object, something is seriously wrong.
[ 4.555962@0] dvb_io_setup start
[ 4.560098@0] DVB: cannot get resource "frontend0_LNBON/OFF"
[ 4.560129@0] DVB: cannot get resource "frontend0_POWERON/OFF"
[ 4.565984@0] DVB: cannot get resource "frontend0_ANTOVERLOAD"
[ 4.572511@0] Smartcard: cannot get resource "smc0_reset"
[ 4.679320@1] init: /init.amlogic.rc: 371: ignored duplicate definition of service 'smbd'
[ 5.969183@1] init: hdmi hpd_status is :48
[ 5.984694@0] init: cannot open '/initlogo.rle'
[ 5.984894@0] init: load_565rle_image_mbx result is: 0
[ 6.144637@0] init: Before e2fsck_main...
[ 13.544533@0] init: After e2fsck_main...
[ 13.762454@1] init: cannot find '/system/bin/xcmid-amlogic', disabling 'xcmidware'
[ 14.137276@1] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
[ 14.141382@1] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
[ 14.155943@0] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
[ 14.164910@0] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
[ 14.179358@0] android_usb:disable, not bind to controller
[ 14.182083@0] android_usb:disable, not bind to controller
[ 14.187515@0] android_usb:enable, not bind to controller
root@android:/ # [ 19.358163@0] init: untracked pid 3631 exited
[ 19.699758@0] init: untracked pid 3624 exited
[ 19.761762@0] init: untracked pid 3628 exited
[ 19.857677@0] init: untracked pid 3626 exited
[ 20.031690@0] init: untracked pid 3627 exited
[ 20.077247@0] init: untracked pid 3632 exited
transmission-daemon[3654]: Transmission 2.77 (14031) started (session.c:722)
transmission-daemon[3654]: RPC Server Adding address to whitelist: 127.0.0.1 (rpc-server.c:803)
transmission-daemon[3654]: RPC Server Serving RPC and Web requests on port 127.0.0.1:9091/transmission/ (rpc-server.c:997)
transmission-daemon[3654]: UDP Failed to set receive buffer: requested 4194304, got 262142 (tr-udp.c:77)
transmission-daemon[3654]: UDP Please add the line "net.core.rmem_max = 4194304" to /etc/sysctl.conf (tr-udp.c:82)
transmission-daemon[3654]: UDP Failed to set send buffer: requested 1048576, got 262142 (tr-udp.c:88)
transmission-daemon[3654]: UDP Please add the line "net.core.wmem_max = 1048576" to /etc/sysctl.conf (tr-udp.c:93)
transmission-daemon[3654]: DHT Reusing old id (tr-dht.c:305)
transmission-daemon[3654]: DHT Bootstrapping from 70 IPv4 nodes (tr-dht.c:153)
transmission-daemon[3654]: Using settings from "/opt/etc/transmission" (daemon.c:517)
transmission-daemon[3654]: Saved "/data/opt/etc/transmission/settings.json" (bencode.c:1738)
transmission-daemon[3654]: Watching "/opt/share/transmission/bt" for new .torrent files (daemon.c:555)
transmission-daemon[3654]: Using inotify to watch directory "/opt/share/transmission/bt" (watch.c:73)
transmission-daemon[3654]: Unable to watch "/opt/share/transmission/bt": No such file or directory (watch.c:79)
transmission-daemon[3654]: Port Forwarding State changed from "Not forwarded" to "???" (port-forwarding.c:93)
[ 79.319065@0] init: untracked pid 3683 exited

helloween · 發表于 2015-8-31 15:34

有高手嗎？

helloween · 發表于 2015-8-31 17:45

helloween · 發表于 2015-9-1 07:53

wokankan · 發表于 2015-9-1 22:07

無解，死心吧，我的100e試了幾百次也不能中斷。

zrh111 · 發表于 2015-12-28 01:06

127|root@android:/ # DX3DQSTR:3db05001
/system/bin/sh: DX3DQSTR:3db05001: not found
127|root@android:/ # Stage 00 Result 00000000
/system/bin/sh: Stage: not found
127|root@android:/ # Stage 01 Result 00000000
/system/bin/sh: Stage: not found

127|root@android:/ # Stage 02 Result 00000000
/system/bin/sh: Stage: not found
U-boot-00000-gb032b65(m6_mbx_g32@jb42-0630) (Dec 10 2013 - 10:27:37)
127|root@android:/ # Stage 03 Result 00000000
/system/bin/sh: Stage: not found
127|root@android:/ # HHH
/system/bin/sh: HHH: not found
127|root@android:/ # Boot From SPI0x12345678
/system/bin/sh: Boot: not found
Clear HDMI KSV RAM
127|root@android:/ # Boot from internal device 1st SPI RESERVED
/system/bin/sh: Boot: not found
127|root@android:/ #
127|root@android:/ # System Started
/system/bin/sh: System: not found
127|root@android:/ # ?nv_init env_init 40
/system/bin/sh: ?nv_init: not found
127|root@android:/ #
127|root@android:/ #
g32@jb42-0630) (Dec 10 2013 - 10:27:37)                                     <
/system/bin/sh: syntax error: 'm6_mbx_g32@jb42-0630' unexpected
No NAND device found!!!
1|root@android:/ #

1|root@android:/ # aml_rtc_init
/system/bin/sh: aml_rtc_init: not found
NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron C revision NAND 4GiB MT29F32G-C)
127|root@android:/ # aml rtc init first time!
/system/bin/sh: aml: not found
1 NAND chips detected
127|root@android:/ # Clear HDMI KSV RAM
/system/bin/sh: Clear: not found
onfi timing mode set failed: 49
127|root@android:/ # DRAM:  1 GiB
B /system/bin/sh: DRAM:: not found
pins and chip->chip_delay:20
127|root@android:/ # relocation Offset is: 105e8000
/system/bin/sh: relocation: not found
oob size is not enough for selected bch mode: NAND_BCH60_1K127|root@android:/ # ot driver, Version U1.06.017 (c) 2010 Amlogic Inc.                         <
/system/bin/sh: syntax error: '(' unexpected
1|root@android:/ # SPI BOOT : continue i 0
/system/bin/sh: SPI: not found
aml nand env valid addr: 10000
127|root@android:/ # No NAND device found!!!
/system/bin/sh: No: not found
key start_blk=2040,end_blk=2047,aml_nand_key_init:684
127|root@android:/ # NAND device id: 2c 68 4 4a a9 0
/system/bin/sh: NAND: not found
aml nand key valid addr: ff010000
0x2c, Chip ID: 0x2c (Micron C revision NAND 4GiB MT29F32G-C)                <
/system/bin/sh: syntax error: '(' unexpected
aml nand key valid addr: ff410000
1|root@android:/ # 1 NAND chips detected
l n/system/bin/sh: 1: not found
and key valid addr: ff610000
127|root@android:/ # onfi timing mode set failed: 49
/system/bin/sh: onfi: not found
i=0,register --- nand_key
127|root@android:/ # #####aml_nand_init, with RB pins and chip->chip_delay:20
start_cycle=10, end_cycle=10,system=5.0ns                                  <
cted bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_BCH30_1K_MODE    <
/system/bin/sh: oob: not found
0x000001000000-0x000001800000 : "aml_logo"
_chip->oob_size =224,bch_bytes =54                                           <
/system/bin/sh: aml_chip-: not found
0x000002000127|root@android:/ # aml_nand_init:oobmul =2,chip->ecc.layout->oobfre>ecc.layout->oobfree[0].length=16,aml_chip->oob_size=224                   <
00-0x0/system/bin/sh: aml_nand_init:oobmul: not found
00042a00000 : "system"
127|root@android:/ # aml nand env valid addr: 10000
/system/bin/sh: aml: not found
127|root@android:/ # key start_blk=2040,end_blk=2047,aml_nand_key_init:684
/system/bin/sh: key: not found
0x000062a00000-0x000072a00000 : "backup"
127|root@android:/ # aml nand key valid addr: ff010000
/system/bin/sh: aml: not found
0x000072a00000-0x0000ff000000 : "data"
127|root@android:/ # aml nand key valid addr: ff210000
/system/bin/sh: aml: not found
127|root@android:/ # aml nand key valid addr: ff410000
/system/bin/sh: aml: not found
na127|root@android:/ # aml nand key valid addr: ff610000
/system/bin/sh: aml: not found
MMC: SDIO Port B: 0, SDIO Port C: 1
ZE=0xfffc; bbt=0x1330; default_keyironment_size=0xeccc                      <
root@android:/ # i=0,register --- nand_key
/system/bin/sh: ---: not found

127|root@android:/ #  NAND bbt detect factory Bad block at 5a00000
/system/bin/sh: NAND: not found
127|root@android:/ # Creating 8 MTD partitions on "nandnormal":
/system/bin/sh: Creating: not found
Out: serial
127|root@android:/ # 0x000000800000-0x000001000000 : "logo"
/system/bin/sh: 0x000000800000-0x000001000000: not found
Err: serial
127|root@android:/ # 0x000001000000-0x000001800000 : "aml_logo"
9f/system/bin/sh: 0x000001000000-0x000001800000: not found
e82914
127|root@android:/ # 0x000001800000-0x000002000000 : "recovery"
/system/bin/sh: 0x000001800000-0x000002000000: not found
127|root@android:/ # 0x000002000000-0x000002800000 : "boot"
/system/bin/sh: 0x000002000000-0x000002800000: not found
Meson_Ethernet
127|root@android:/ # 0x000002800000-0x000042a00000 : "system"
/system/bin/sh: 0x000002800000-0x000042a00000: not found
init suspend firmware done. (ret:0)
detect_storage
nand exist return 0
setenv storage nand
127|root@android:/ #  NAND bbt detect factory Bad block at 5a00000
/system/bin/sh: NAND: not found
current factory:2
Hit Enter key to stop autoboot:  0
compatible nand
127|root@android:/ # 0x000042a00000-0x000062a00000 : "cache"
/system/bin/sh: 0x000042a00000-0x000062a00000: not found
8388608 bytes read: OK

NAND read: boot offset 0x0, size 0x127|root@android:/ # 0x000062a00000-0x000072a00000 : "backup"
/system/bin/sh: 0x000062a00000-0x000072a00000: not found
name=nand_key nand_key
read:addr:0xff010000,phy_blk_addr:2040,phy_page_addr:8,aml_nand_get_key:125
device:nand, init key ok!!
don't found keyname,uboot_key_read:1502
prefetch hdcp keys from nand failed
## Booting kernel from Legacy 127|root@android:/ # 0x000072a00000-0x0000ff000000 : "data"

/system/bin/sh: 0x000072a00000-0x0000ff000000: not found
Entry Point:  80008000
Verifying Checksum ... OK
      Ramdisk start addr = 0x82340800, len = 0x10080e
127|root@android:/ # nandnormal initialized ok
/system/bin/sh: nandnormal: not found
127|root@android:/ # detect mx chiprevD :1 and nand_type: 0
/system/bin/sh: detect: not found
127|root@android:/ # nand_curr_device =1
/system/bin/sh: nand_curr_device: not found
127|root@android:/ # MMC: SDIO Port B: 0, SDIO Port C: 1
/system/bin/sh: MMC:: not found
127|root@android:/ # SPI BOOT,spi_env_relocate_spec : env_relocate_spec 53
/system/bin/sh: SPI: not found
127|root@android:/ #
127|root@android:/ # SPI NOR Flash have write protect!!!
/system/bin/sh: SPI: not found
127|root@android:/ # In: serial
/system/bin/sh: In:: not found
127|root@android:/ # Out: serial
/system/bin/sh: Out:: not found
127|root@android:/ # Err: serial
/system/bin/sh: Err:: not found
127|root@android:/ # register usb cfg[0] = 9fe82914
/system/bin/sh: register: not found
127|root@android:/ # Net: current factory:2
/system/bin/sh: Net:: not found
127|root@android:/ # set factory eth 101G phy.
root@android:/ # Meson_Ethernet
/system/bin/sh: Meson_Ethernet: not found
127|root@android:/ # init suspend firmware done. (ret:0)
/system/bin/sh: syntax error: '(' unexpected
1|root@android:/ # detect_storage
/system/bin/sh: detect_storage: not found
127|root@android:/ # nand exist return 0
/system/bin/sh: nand: not found
127|root@android:/ # setenv storage nand
/system/bin/sh: setenv: not found
127|root@android:/ # reboot_mode=charging
root@android:/ # ir init
/system/bin/sh: ir: not found
127|root@android:/ # switch_boot_mode
/system/bin/sh: switch_boot_mode: not found
127|root@android:/ # current factory:2
/system/bin/sh: current: not found
127|root@android:/ # Hit Enter key to stop autoboot:  0
/system/bin/sh: Hit: not found
127|root@android:/ # compatible nand
/system/bin/sh: compatible: not found
127|root@android:/ # Booting from nand ...
/system/bin/sh: Booting: not found
127|root@android:/ #
127|root@android:/ # NAND read: logo whole chip
/system/bin/sh: NAND: not found
127|root@android:/ #  8388608 bytes read: OK
/system/bin/sh: 8388608: not found
127|root@android:/ #
127|root@android:/ # NAND read: boot offset 0x0, size 0x600000
/system/bin/sh: NAND: not found
127|root@android:/ #  6291456 bytes read: OK
/system/bin/sh: 6291456: not found
127|root@android:/ # pre-clear hdmi ram
/system/bin/sh: pre-clear: not found
127|root@android:/ # hdcp get form storage medium: nand
/system/bin/sh: hdcp: not found
127|root@android:/ # name=nand_key nand_key
/system/bin/sh: nand_key: not found
addr:2040,phy_page_addr:8,aml_nand_get_key:125                               <
/system/bin/sh: read:addr:0xff010000,phy_blk_addr:2040,phy_page_addr:8,aml_nand_get_key:125: not found
127|root@android:/ # device:nand, init key ok!!
/system/bin/sh: device:nand,: not found
127|root@android:/ # don't found keyname,uboot_key_read:1502
> prefetch hdcp keys from nand failed
> ## Booting kernel from Legacy Image at 82000000 ...
> Image Name: Linux-3.0.50-gba996df
> Image Type: ARM Linux Kernel Image (lzma compressed)
> Data Size: 3407353 Bytes = 3.2 MiB
> Load Address: 80008000
> Entry Point:  80008000
> Verifying Checksum ... OK
>       Ramdisk start addr = 0x82340800, len = 0x10080e
> Uncompressing Kernel Image ... OK
>

zrh111 · 發表于 2015-12-28 01:07

我的也是請高手

xiachuan159 · 發表于 2016-4-8 20:52

我的也無法中斷啊

› 智能電視盒 / 安卓TV機頂盒區 › 天貓魔盒論壇

天貓魔盒1代E版TTL啟動無法打斷

天貓魔盒1代E版TTL啟動無法打斷

相關帖子