CM311-3-YST(1G+8G)-晨星MSO9385 TTL線刷請教一下

zwb1616 · 發表于 2024-1-29 18:45

CM311-3-YST(1G+8G)-晨星MSO9385 TTL線刷輸入三個命令
第一，第二正常執行
第三個命令（avbab disable-verity）不能識別
請教大神幫助看一下什么原因，謝謝

以下是開機代碼：

*********u16CZ*****************
00000001
*********u16DO*****************
00000001
*********_3padInitTbl*****************
20082900
*********Load OneBin Pad address:*****************
20082900
EMMC

Relocation Offset is: 015FF000
[AT][MB][start ub][0]

U-Boot 2011.06-00000-g575ae8d-dirty (Sep 01 2021 - 17:23:07)

[Mboot] ===== sw IR Config Register =====
[Mboot] ===== Attach IR Interrupt  ======
Function = SYSOpen, Line = 794, current resource pri_shm content is: 0
Function = SYSOpen, Line = 813, [SYS INFO] OPEN INSTANCE...
create instance at 2D7F8358 with private size 108 bytes at 2D7F83A0

[MIU INFO] miu opencreate instance at 2D7F8410 with private size 88 bytes at 2D7F8458
create instance at 2D7F84B8 with private size 44 bytes at 2D7F8500

uboot held at [2D5DDF60~2E900000],size=013220A0
DRAM:  233 MiB
Now running in RAM - U-Boot at: 2DE00000

eMMC: HS200 200MHz
eMMC 7.12 GB [E3FFF8h]
SAR5=ON
In: serial
Out: serial
Err: serial
Net: No ethernet found.
MAC:  0xAC: 0xBB: 0x61: 0xD7:0xCF: 0x45
create instance at 2D808968 with private size 44 bytes at 2D8089B0
[AT][MBoot][Driver Init][0]
mmc change mount : tvconfig
Size of file "/config/sys.ini" from mmc device 0 partition tvconfig: 1809 bytes
Loading file "/config/sys.ini" at offset 0x0 from mmc device 0 partition tvconfig
1809 bytes read
sizeof( sys ini script ) --------> 1809 bytes
set platform=mi to bootargs OK
customer_ini_path env value --> /vendor/tvconfig/config/model/Customer_1.ini
Half model.ini path --> /vendor/tvconfig/config/model/Customer_1.ini
** File not found /vendor/tvconfig/config/model/Customer_1.ini
[ERROR] vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found /vendor/tvconfig/config/model/Customer_1.ini
[ERROR] vfs_getsize:424: ext4filesize mmc fail
[ERROR] loadscript:867: No enough buffer or path fail(/vendor/tvconfig/config/model/Customer_1.ini) :
[src/MsUtility.c] [loadscript]
filter /tvconfig/config/model/Customer_1.ini, and find file again!!
** File not found /tvconfig/config/model/Customer_1.ini
[ERROR] vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found /tvconfig/config/model/Customer_1.ini
[ERROR] vfs_getsize:424: ext4filesize mmc fail
[ERROR] loadscript:867: No enough buffer or path fail(/tvconfig/config/model/Customer_1.ini) :
[src/MsUtility.c] [loadscript]
Half model.ini path --> /vendor/tvconfig/config/model/Customer_1.ini
Full model.ini  path --> /vendor/tvconfig/config/model/Customer_1.ini
Full model.ini  path --> /vendor/tvconfig/config/model/Customer_1.ini
** File not found /vendor/tvconfig/config/model/Customer_1.ini
[ERROR] vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found /vendor/tvconfig/config/model/Customer_1.ini
[ERROR] vfs_getsize:424: ext4filesize mmc fail
[ERROR] loadscript:867: No enough buffer or path fail(/vendor/tvconfig/config/model/Customer_1.ini) :
[src/MsUtility.c] [loadscript]
mmc change mount : tvconfig
** File not found /vendor/vendor/tvconfig/config/model/Customer_1.ini
[ERROR] vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found /vendor/vendor/tvconfig/config/model/Customer_1.ini
[ERROR] vfs_getsize:424: ext4filesize mmc fail
[ERROR] loadscript:867: No enough buffer or path fail(/vendor/vendor/tvconfig/config/model/Customer_1.ini) :
[src/MsUtility.c] [loadscript]
filter /config, and find file again!!
** File not found /vendor/tvconfig/config/model/Customer_1.ini
[ERROR] vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found /vendor/tvconfig/config/model/Customer_1.ini
[ERROR] vfs_getsize:424: ext4filesize mmc fail
[ERROR] loadscript:867: No enough buffer or path fail(/vendor/tvconfig/config/model/Customer_1.ini) :
[src/MsUtility.c] [loadscript]
mmc change mount : tvconfig
mmc change mount : system
** File not found system/media/boot0.jpg
[ERROR] vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found system/media/boot0.jpg
[ERROR] vfs_getsize:424: ext4filesize mmc fail
mmc change mount : tvconfig
[ERROR] prepare_nand_dbtable:1055: /system/system/media/boot0.jpg do not exist !
** File not found 2D5DCDF4
[ERROR] vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found 2D5DCDF4
[ERROR] vfs_getsize:424: ext4filesize mmc fail
gRGBWPath=
gstDbtable.dbdata[E_DB_RGBW].Size=0x0
MPOOL size : 0x200000
mmc change mount : tvconfig
Size of file "/config/panel/DACOUT_1080P_60.ini" from mmc device 0 partition tvconfig: 6006 bytes
Loading file "/config/panel/DACOUT_1080P_60.ini" at offset 0x0 from mmc device 0 partition tvconfig
6006 bytes read
sizeof( panel ini script ) --------> 6006 bytes
u32PeriodPWM = 0
u32DutyPWM = 0x0
mmc change mount : tvconfig
** File not found 2D5DD104
[ERROR] vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found 2D5DD104
[ERROR] vfs_getsize:424: ext4filesize mmc fail
[ERROR] loadscript:867: No enough buffer or path fail() :
[src/MsUtility.c] [loadscript]
filter /config, and find file again!!
[ERROR] vfs_getsize:393: filedir is a null pointer
[ERROR] loadscript:867: No enough buffer or path fail() :
[src/MsUtility.c] [loadscript]
[ERROR] Load_BoardSetting_ToFlash:2111: parse_board_ini fail !!
set resolution info to bootargs
mmc change mount : tvconfig
Size of file "/config/dfbrc.ini" from mmc device 0 partition tvconfig: 1464 bytes
Loading file "/config/dfbrc.ini" at offset 0x0 from mmc device 0 partition tvconfig
1464 bytes read
sizeof( dfb ini script ) --------> 1464 bytes
logo -> [1]
mmc change mount : tvconfig
Size of file "/config/ir_config.ini" from mmc device 0 partition tvconfig: 9236 bytes
Loading file "/config/ir_config.ini" at offset 0x0 from mmc device 0 partition tvconfig
9236 bytes read
sizeof( ir_config ini script ) --------> 9236 bytes
section = MIR_Mstar
section = MIR_ChinaMobile
section = MIR_ChinaUnicom
section = MIR_ChinaTelecom
section = MIR_ChinaMobile_00FF
Size of file "/config/ir_config.ini" from mmc device 0 partition tvconfig: 9236 bytes
Loading file "/config/ir_config.ini" at offset 0x0 from mmc device 0 partition tvconfig
9236 bytes read
sizeof( ir_config ini script ) --------> 9236 bytes
section = PIR_ChinaMobile_00FF
section = PIR_ChinaMobile_2014
section = PIR_ChinaMobile
mmc change mount : tvconfig
** File not found 2D5DD214
[ERROR] vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found 2D5DD214
[ERROR] vfs_getsize:424: ext4filesize mmc fail
[ERROR] Load_RGBWBinToFlash:2715: vfs_getsize error:  !
3 blocks written: OK
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done

Changelist:    00112233
============= set bootargs ===============
[Mboot] ===== zjj.... before shezhi ipaddr ===AC:BB:61:D7:CF:45==17
============= after bootargs ===============
[ERROR] set_bootargs_cfg:940: New bootargs( NewArgLen : 1260) has exceeded the env_size( CONFIG_SYS_CBSIZE :1024 )
set_bootargs_cfg failed !
[ERROR] set_security_cfg:1112: set SECURITY=ON/OFF to bootargs fail
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
Hit any key to stop autoboot:  0
C2P#
C2P#
C2P#
C2P#
C2P#

月亮有蛀牙 · 發表于 2024-1-30 09:04

刷機固件是不是用錯了？

royalwei · 發表于 2024-1-30 09:37

如果有mstarupgrade.bin文件，那么插入U(xiǎn)盤執行usb_bin_check就行，沒必要這么麻煩，如果沒有且磚了，就要恢復分區，恢復分區有一定順序

zwb1616 · 發表于 2024-1-30 10:12

royalwei 發表于 2024-1-30 09:37
如果有mstarupgrade.bin文件，那么插入U(xiǎn)盤執行usb_bin_check就行，沒必要這么麻煩，如果沒有且磚了，就要恢 ...

磚了，不麻煩的話可以請教下如何恢復分區嗎？謝謝

zwb1616 · 發表于 2024-1-30 10:41

royalwei 發表于 2024-1-30 09:37
如果有mstarupgrade.bin文件，那么插入U(xiǎn)盤執行usb_bin_check就行，沒必要這么麻煩，如果沒有且磚了，就要恢 ...

老師按你說的做了，出現如下字符串麻煩你給看下，謝謝

usb_bin_check.txt (1.63 KB, 下載次數: 11)

royalwei · 發表于 2024-1-30 12:18

換包

royalwei · 發表于 2024-1-30 12:21

http://ktgpgw.cn/tv-1236613-1-1.html

royalwei · 發表于 2024-1-30 12:21

2+8，網上大多都是2+8的包，找1+8的包

royalwei · 發表于 2024-1-30 13:20

你發給我文本的意思是分區校驗失敗，可能是包不對，可能是U盤問題

zwb1616 · 發表于 2024-1-30 16:49

本帖最后由 zwb1616 于 2024-1-30 16:52 編輯

royalwei 發表于 2024-1-30 13:20
你發給我文本的意思是分區校驗失敗，可能是包不對，可能是U盤問題

1+8G的包找了很久了，找不到了，2+8G的包倒是下了幾個CM311-3 的，也找到了幾個卡刷包c(diǎn)m311-3s的，但是都出現我給你看的文件里的內容一樣的。但是2+8G的救磚包里的文件大部分會提示超范圍不能寫入，復制avbab disable-verity ，粘貼后按回車；這個avbab disable-verity 不能執行C2P#C2P#
C2P# setenv devicestate unlock
C2P# saveenv
Saving Environment to MMC...
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
C2P# avbab disable-verity
Unknown command 'avbab' - try 'help'
C2P#

› 你問我答 / 玩機教程 / 固件 › ZNDS刷機/救磚

CM311-3-YST(1G+8G)-晨星MSO9385 TTL線刷請教一下 ...

CM311-3-YST(1G+8G)-晨星MSO9385 TTL線刷請教一下

相關帖子