華為6110-T已經ttl連接，但只能看到輸出無法輸入，請問能.....

dabao_dt · 發表于 2019-11-23 20:46

本帖最后由 dabao_dt 于 2019-11-23 20:57 編輯

華為6110-T已經ttl連接，但只能看到輸出無法輸入，請問能不能解決？
各位好：我現在使用的是電信的6110-T，我想自己安裝apk，我知道論壇有短接刷機包，但還想使用原來的iptv和桌面。我看到很多人提到使用ttl后獲得系統shell通過命令安裝apk，我已經拆機并通過ttl線在putty和hitool都獲得了輸出，但是在敲回車卻無相應。
請問大家誰知道咋解決？如何才能簡單地安裝程序？謝謝ps:輸出信息這個只是一部分

Bootrom start (CA)
Boot Media: eMMC (Default Speed)
Decrypt auxiliary code ...OK
Enter boot auxiliary code

Auxiliary code - v1.00
DDR code - V1.1.2.1 20171011
Build: May 11 2018 - 19:12:57
Reg Version:  v1.5.2\
Reg Time:    2018/08/01 16:39:44
Reg Name:    hi3798m31dms1_hi3798mv310_DDR3-1866_1GB_16bitx2_2layers.re?5Set cpu freq

Boot auxiliary code success
Bootrom success

System startupelocate Boot

Jump to C code

Fastboot 3.3.0 (root@STB-5288-01) (Nov 16 2018 - 13:30:02)

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
hi_eth: hieth_mdiobus_read,73:mdio busy
hi_eth: no dev probed!
init: /init.bigfish.rc: 48: invalid command 'getprop'
init: /init.bigfish.rc: 113: invalid option 'sdcard_r'
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
init: read misc boot info 1088/1088 bytes.
init: mount system image fail 0 times.
init: init: /system/bin/e2fsck
init: init: -v
init: init: -f
init: init: -y
init: init: /dev/block/mmcblk0p19
init: init: result is 256
init: mkdir(/ctc/app) OK#0
init: not found file and directiry in customer path
init: property 'ro.hw.sys.zroid.path' doesn't exist while expanding '${ro.hw.sys.zroid.path}etc/init.thirdos.rc'
init: cannot expand '${ro.hw.sys.zroid.path}etc/init.thirdos.rc' while assigning to 'hmt_import'
init: property 'ro.hw.sys.zroid.path' doesn't exist while expanding '${ro.hw.sys.zroid.path}bin'
init: cannot expand '${ro.hw.sys.zroid.path}bin' while assigning to 'hmt_export'
init: property 'ro.hw.sys.zroid.path' doesn't exist while expanding '${ro.hw.sys.zroid.path}lib'
init: cannot expand '${ro.hw.sys.zroid.path}lib' while assigning to 'hmt_export'
init: /dev/hw_random not found
init: cmdline buffer=console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),4M(bootargs),50M(recovery),1M(deviceinfo),4M(baseparam),8M(logo),16M(fastplay),8M(misc),30M(factory),50M(kernel),2M(sysinfo),8M(iptv_data),50M(trustedcore),50M(securestore),500M(backup),500M(cache),1000M(system),100M(appdata),4786M(userdata),-(telepart) initrd=0x4000000,0x5466E quiet fci=0e2823e futc=1542346198 mem=1G mmz=ddr,0,0,36M ddrsize=0x40000000 kci=1eeb2e1 pcb=0 bom=011

healthd: wakealarm_init: timerfd_create failed
init: cannot find '/system/bin/rild', disabling 'ril-daemon'
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/bin/basicService', disabling 'basicService'
init: cannot find '/system/bin/ontattr', disabling 'ontattr'
init: cannot find '/system/bin/frontPanel', disabling 'frontPanel'
init: cannot find '/system/bin/mtkbt', disabling 'blueangel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
init: cannot find '/system/bin/skyplayserver', disabling 'skyplayserver'
init: cannot find '/system/bin/dlnaserver', disabling 'dlnaserver'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
healthd: No charger supplies found

中戲的學霸迷妹 · 發表于 2019-11-24 10:18

幫頂

zha一杯清茶 · 發表于 2019-12-5 20:25

我只是路過打醬油的。

王惟珍 · 發表于 2019-12-23 17:10

直接燒錄或者卡刷！

djg301 · 發表于 2022-6-24 10:55

本帖最后由 djg301 于 2022-6-24 10:57 編輯

我和你的跑碼一樣，型號也一樣，問題也一樣！這樣的話，連備份都做不了，更別說別的了。不敢用海思工具刷，怕成磚。大神出來吧，有償刷出來也行。

gemshine · 發表于 2022-7-20 08:58

我也是海思，兩款不一樣的盒子，都有這個問題，流控也已經關掉了，電腦換過了，putty換過了，都一樣。。

› 運營商IPTV / 有線電視 / 廣電機頂盒 › 華為悅盒