盒子指示燈亮，但是插上高清線和AV線都試了電視沒反應，連黑屏都不黑，直接無反應
鏈接海兔刷機后的代碼
串口已經(jīng)連接，請給單板上電，若已經(jīng)上電，請斷電后重新上電。
Bootrom start
Boot Media: eMMC (Default Speed)
##############################################
Decrypt auxiliary code ...OK
lsadc voltage min: 00000142, max: 00000148, aver: 00000144, index: 0000000B
Failed to send the boot data.
1. The system fails to run properly due to an error in boot code compilation.
2. If the secure boot function is disabled and boot rootkey is set for the OEM, the boot image is encrypted, but the boot rootkey used for encrypting the boot is different from the boot rootkey burnt to the OTP.
3. The chip OTP is set to forcibly decrypt the boot image. However, the boot is not correctly encrypted.
4. The board DDR is faulty.
Timeout error.
5. The boot code does not support the type of the flash memory to be burnt. If the boot print function is enabled, you can view the printing information through the serial port, showing that the current flash memory type is not supported.
Failed to send the head frame.
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V2.1.7 20190326
Build: Feb 20 2020 - 15:34:15
Invalid reg version
Boot auxiliary code execute failed.
STATE:0x00000000 0x00000000 0x00000000 0x00000000
Failed to download fastboot!
|
網(wǎng)站導航
發(fā)表于 2024-9-5 21:16
收藏
淘帖
頂一個
踩
提升卡
置頂卡
變色卡
千斤頂
znds.com 