首頁 收藏 QQ群
 網站導航

ZNDS智能電視網 推薦當貝市場

TV應用下載 / 資源分享區

軟件下載 | 游戲 | 討論 | 電視計算器

綜合交流 / 評測 / 活動區

交流區 | 測硬件 | 網站活動 | Z幣中心

新手入門 / 進階 / 社區互助

新手 | 你問我答 | 免費刷機救磚 | ROM固件

查看: 75406|回復: 15
上一主題 下一主題
[求助]

江蘇移動的魔百盒G2-100B,TTL跑碼后是這個樣子的,求大神...

[復制鏈接]
跳轉到指定樓層
樓主
發表于 2018-4-30 17:23 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式 | 來自北京
江蘇移動的魔百盒G2-100B,TTL跑碼后是這個樣子的,求大神指導一下如何破解,謝謝!

Bootrom start
Boot from eMMC
Starting fastboot ...


System startup
DDRS
Reg Version:  v1.1.0
Reg Time:     2016/9/19  10:57:09
Reg Name:     hi3798mdmo1f_hi3798mv100_ddr3_1gbyte_16bitx2_2layers_emmc.reg

Jump to DDR


Fastboot 3.3.0-00003-g7aa6fa0-dirty (zs@yinhe-2bu) (Oct 08 2016 - 12:12:00)

Fastboot:      Version 3.3.0
Build Date:    Oct  8 2016, 12:12:47
CPU:           Hi3798Mv100
Boot Media:    eMMC
DDR Size:      1GB

Check nand flash controller v610. found
Special NAND id table Version 1.36
Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
No NAND device found!!!

MMC/SD controller initialization.
MMC/SD Card:
    MID:         0x45
    Read Block:  512 Bytes
    Write Block: 512 Bytes
    Chip Size:   3776M Bytes (High Capacity)
    Name:        "SEM04"
    Chip Type:   MMC
    Version:     4.5
    Speed:       52000000Hz
    Bus Width:   8bit
    Boot Addr:   0 Bytes

Boot Env on eMMC
    Env Offset:          0x00100000
    Env Size:            0x00010000
    Env Range:           0x00010000


SDK Version: HiSTBAndroidV600R001C00SPC063_v2016022921

press the key!!
get key 0 2
get chipid =137980100
get chipType (HI3798MV100)
count=2
mac:CC:D3:E2:27:A3:6A

Reserve Memory
    Start Addr:          0x3FFFE000
    Bound Addr:          0x8D31000
    Free  Addr:          0x3ED48000
    Alloc Block:  Addr        Size
                  0x3FBFD000       4194304
                  0x3F8FC000       3145728
                  0x3F87B000       524288
                  0x3F878000       8192
                  0x3F843000       212992
                  0x3F742000       1048576
                  0x3F73E000       12288
                  0x3F3B9000       3686400
                  0x3F223000       1658880
                  0x3EE9E000       3686400
                  0x3ED4B000       1384448
                  0x3ED48000       8192

Press Ctrl+C to stop autoboot

MMC read: dev # 0, block # 307200, count 20480 ... 20480 blocks read: OK

81075463 Bytes/s

Found Initrd at 0x04000000 (Size 336616 Bytes), align at 16384 Bytes

## Booting kernel from Legacy Image at 01ffffc0 ...
   Image Name:   Linux-3.10.0_s40
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    7848144 Bytes = 7.5 MiB
   Load Address: 02000000
   Entry Point:  02000000
   XIP Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.10.0_s40 (zs@yinhe-2bu) (gcc version 4.4.1 (Hisilicon_v200(gcc4.4-290+glibc-2.11+eabi+nptl)) ) #1 SMP Sat Oct 8 11:52:26 CST 2016
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: bigfish
cma: CMA: reserved 436 MiB at 23800000
cma: CMA: reserved 4 MiB at 3fc00000
Memory policy: ECC disabled, Data cache writealloc
CPU: Hi3798Mv100
PERCPU: Embedded 8 pages/cpu @81a88000 s12224 r8192 d12352 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
Kernel command line: console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),1M(bootargs),10M(recovery),2M(deviceinfo),8M(baseparam),8M(pqparam),20M(logo),20M(logobak),40M(fastplay),40M(fastplaybak),40M(kernel),20M(misc),500M(system),500M(cache),50M(private),100M(dvbdata),2300M(userdata),-(sdcard) coherent_pool=1M initrd=0x4000000,0x522E8 mem=1G mmz=ddr,0,0,435M androidboot.boardlayers=2
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1024MB = 1024MB total
Memory: 562956k/562956k available, 485620k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xc0800000 - 0xff000000   (1000 MB)
    lowmem  : 0x80000000 - 0xc0000000   (1024 MB)
    pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
    modules : 0x7f000000 - 0x7fe00000   (  14 MB)
      .text : 0x80008000 - 0x80ee2018   (15209 kB)
      .init : 0x80ee3000 - 0x80f53fc0   ( 452 kB)
      .data : 0x80f54000 - 0x8109b088   (1309 kB)
       .bss : 0x8109b088 - 0x8128129c   (1945 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:192
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
Console: colour dummy device 80x30
Calibrating delay loop... 1949.69 BogoMIPS (lpj=974848)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
ftrace: allocating 33052 entries in 97 pages
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x80b2ddc8 - 0x80b2de20
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated (7829.50 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
[114 ERROR-Invalid]:MCE_Init[2135]:ERR: get PDM Param
NET: Registered protocol family 16
DMA: preallocated 1024 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Serial: AMBA PL011 UART driver
uart:0: ttyAMA0 at MMIO 0xf8b00000 (irq = 81) is a PL011 rev2
console [ttyAMA0] enabled
uart:1: ttyAMA1 at MMIO 0xf8006000 (irq = 82) is a PL011 rev2
uart:2: ttyAMA2 at MMIO 0xf8b02000 (irq = 83) is a PL011 rev2
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switching to clocksource timer3
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 328K (84000000 - 84052000)
NetWinder Floating Point Emulator V0.97 (double precision)
CPU PMU: probing PMU on CPU 2
hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. (NAND) ? 2001-2006 Red Hat, Inc.
fuse init (API version 7.22)
msgmni has been set to 1980
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
loop: module loaded
input: Hi keyboard as /devices/virtual/input/input0
input: Hi mouse as /devices/virtual/input/input1
input: qwerty as /devices/virtual/input/input2
Hi Android vinput driver init successful!
Found Nand Flash Controller V610.
Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
No NAND device found
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
libphy: himii: probed
Up port phy at 0x01 is connect
libphy: PHY himii:1f not found
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbotg: usb otg driver registeredusbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver option
usbserial: USB Serial support registered for GSM modem (1-port)
dwc_otg: version 3.00a 10-AUG-2012
Core Release: 3.10a
Setting default values for core params
Using Buffer DMA mode
Dedicated Tx FIFOs mode
g_ffs: file system registered
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
mmc0: BKOPS_EN bit is not set
mmc0: new high speed DDR MMC card at address 0001
mmcblk0: mmc0:0001 SEM04G 3.68 GiB
mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB
mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB
mmcblk0: p1(fastboot) p2(bootargs) p3(recovery) p4(deviceinfo) p5(baseparam) p6(pqparam) p7(logo) p8(logobak) p9(fastplay) p10(fastplaybak) p11(kernel) p12(misc) p13(system) p14(cache) p15(private) p16(dvbdata) p17(userdata) p18(sdcard)
mmcblk0boot1: unknown partition table
mmcblk0boot0: unknown partition table
hi_mci0: eMMC/MMC/SD Device NOT detected!
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
zram: Created 1 device(s) ...
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'

Mali: Mali device driver loaded
usbcore: registered new interface driver snd-usb-audio
oprofile: using timer interrupt.
GACT probability on
Mirror/redirect action on
Failed to load ipt action
Simple TC action Loaded
netem: version 1.3
u32 classifier
    Performance counters on
    input device check on
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (15841 buckets, 63364 max)
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
IPVS: Registered protocols ()
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: Creating netns size=776 id=0
IPVS: ipvs loaded.
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
Bridge firewalling registered
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
8021q: 802.1Q VLAN Support v1.8
lib80211: common routines for IEEE802.11 drivers
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Load hi_tde.ko success.         (SDK_VERSION:[HiSTBAndroidV600R001C00SPC063_v2016022921] Build Time:[Oct  8 2016, 11:51:29])
Load hi_fb.ko success.  (SDK_VERSION:[HiSTBAndroidV600R001C00SPC063_v2016022921] Build Time:[Oct  8 2016, 11:50:48])
DieID is locked!
hisi-sndcard hisi-sndcard:  aiao-hifi <-> hisi-i2s mapping ok
Load hi_png.ko success.         (SDK_VERSION:[HiSTBAndroidV600R001C00SPC063_v2016022921] Build Time:[Oct  8 2016, 11:51:20])
Load hi_jpegenc.ko success.     (SDK_VERSION:[HiSTBAndroidV600R001C00SPC063_v2016022921] Build Time:[Oct  8 2016, 11:51:04])
enter temperature_control_thread
ALSA device list:
  #0: HISI-AIAO
Freeing unused kernel memory: 448K (80ee3000 - 80f53000)
init: /init.bigfish.rc: 79: invalid option 'sdcard_r'
init: /init.hidolphin.rc: 1: ignored duplicate definition of service 'hidns-sd'
init:  not 512M version
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p17): recovery complete
EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p14): recovery complete
EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p15): recovery complete
EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p16): recovery complete
EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: (null)
init: /dev/hw_random not found
init: read addr:12 len 0
init: OK! sn:00410416210321200902CCD3E227A36A
healthd: No charger supplies found
init: cannot find '/system/bin/rild', disabling 'ril-daemon'
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: cannot find '/system/bin/mtkbt', disabling 'blueangel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
healthd: BatteryStatusPath not found
healthd: BatteryHealthPath not found
healthd: BatteryPresentPath not found
healthd: BatteryCapacityPath not found
healthd: BatteryVoltagePath not found
healthd: BatteryTemperaturePath not found
healthd: BatteryTechnologyPath not found


Welcome to HiAndroid


ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
hiusb-ehci hiusb-ehci.0: HIUSB EHCI
hiusb-ehci hiusb-ehci.0: new USB bus registered, assigned bus number 1
hiusb-ehci hiusb-ehci.0: irq 98, io mem 0xf9890000
hiusb-ehci hiusb-ehci.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hiusb-ehci hiusb-ehci.1: HIUSB EHCI
hiusb-ehci hiusb-ehci.1: new USB bus registered, assigned bus number 2
hiusb-ehci hiusb-ehci.1: irq 94, io mem 0xf9930000
hiusb-ehci hiusb-ehci.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
hiusb-ohci hiusb-ohci.0: HIUSB OHCI
hiusb-ohci hiusb-ohci.0: new USB bus registered, assigned bus number 3
hiusb-ohci hiusb-ohci.0: irq 99, io mem 0xf9880000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hiusb-ohci hiusb-ohci.1: HIUSB OHCI
hiusb-ohci hiusb-ohci.1: new USB bus registered, assigned bus number 4
hiusb-ohci hiusb-ohci.1: irq 95, io mem 0xf9920000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
usbcore: registered new interface driver bt_usb
<1>csr_usb: CSR USB driver registered
BT_USB: major 249
bt_usb_construct_device 0
bt_usb_construct_device 1
bt_usb_construct_device 2
tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel.
Disabling lock debugging due to kernel taint
Tuxera NTFS driver 3015.1.29.1.1 [Flags: R/W MODULE].
create enforce
warning: `zygote' uses 32-bit capabilities (legacy support in use)
lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
lowmemorykiller: oom_adj 0 => oom_score_adj 0
lowmemorykiller: oom_adj 1 => oom_score_adj 58
lowmemorykiller: oom_adj 2 => oom_score_adj 117
lowmemorykiller: oom_adj 3 => oom_score_adj 176
lowmemorykiller: oom_adj 9 => oom_score_adj 529
lowmemorykiller: oom_adj 15 => oom_score_adj 1000
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
device eth0 entered promiscuous mode
libphy: himii:01 - Link is Down
libphy: himii:01 - Link is Up - 100/Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: sys_prop: permission denied uid:1000  name:java.net.preferIPv4Stack
init: sys_prop: permission denied uid:1000  name:java.net.preferIPv6Addresses
init: untracked pid 2765 exited
init: untracked pid 1574 exited
init: untracked pid 3078 exited
init: untracked pid 2769 exited



上一篇:斐訊t1 刷機只能到1%就停了求助刷機
下一篇:福建移動CM101S刷機成磚了,求大神們相助
推薦
發表于 2020-4-2 17:11 來自ZNDS手機版 | 只看該作者 | 來自江蘇
小鄧的太貴了,可以買一個了
回復 支持 1 反對 0

使用道具 舉報

沙發
 樓主| 發表于 2018-4-30 18:15 | 只看該作者 | 來自北京
@hao501802766  ,大神幫幫忙啊,謝謝
回復 支持 反對

使用道具 舉報

板凳
發表于 2018-5-2 10:54 | 只看該作者 | 來自浙江
幫頂了
回復 支持 反對

使用道具 舉報

地板
 樓主| 發表于 2018-5-2 13:45 | 只看該作者 | 來自北京

謝謝,山陰路的夏天
回復 支持 反對

使用道具 舉報

5#
發表于 2018-5-16 11:18 | 只看該作者 | 來自廣東
Hi3798Mv100
你鍵盤按回車 看看有沒回饋信息,有的話就簡單  直接插U盤  然后用

df
cd /mnt/sda/sda1
cp *.apk /data/app
am start com.dangbei.tvluancher  就完成破解安裝了
回復 支持 反對

使用道具 舉報

6#
發表于 2018-12-30 17:43 | 只看該作者 | 來自江蘇
樓主在嗎 我也是這個盒子 TTL線怎么接 QQ448080111 謝謝
回復 支持 反對

使用道具 舉報

7#
發表于 2019-4-26 10:30 來自ZNDS手機版 | 只看該作者 | 來自江蘇
有沒有成功?
回復 支持 反對

使用道具 舉報

8#
發表于 2019-4-28 02:33 來自ZNDS手機版 | 只看該作者 | 來自江蘇
有刷機包了,我刷過了
回復 支持 反對

使用道具 舉報

9#
發表于 2019-9-13 11:15 | 只看該作者 | 來自江蘇
刷幾包發出來看看啊
回復 支持 反對

使用道具 舉報

10#
發表于 2019-11-10 07:30 來自ZNDS手機版 | 只看該作者 | 來自江西
小鄧有
回復 支持 反對

使用道具 舉報

您需要登錄后才可以回帖 登錄 | 立即注冊

本版積分規則

Archiver|新帖|標簽|軟件|Sitemap|ZNDS智能電視網 ( 蘇ICP備2023012627號 )

網絡信息服務信用承諾書 | 增值電信業務經營許可證:蘇B2-20221768 丨 蘇公網安備 32011402011373號

GMT+8, 2024-11-17 11:03 , Processed in 0.080156 second(s), 13 queries , Redis On.

Powered by Discuz!

監督舉報:report#znds.com (請將#替換為@)

© 2007-2024 ZNDS.Com

快速回復 返回頂部 返回列表